The Ghost Immobiliser
Immobilisers are an effective tool to fight vehicle theft. They prevent the car from being started without a key fob and work well to stop hotwiring and traditional forms of vehicle theft. Innovative methods like key cloning or relay theft are becoming more common.
The Ghost Immobiliser has been designed to fight these trends and make your vehicle unnoticeable. It doesn't make use of LED indicators, radio signals or key fobs and is silent and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key cloning and theft. It is a TASSA approved product and has been recognized by insurance companies. It operates silently and is virtually unnoticeable to thieves. It uses buttons in your steering wheel, centre console, and door panels to make an individual pin code that must be entered before you can start your vehicle. You can create as many as 20 different sequences to improve security. It's easy to install and doesn't require any additional hardware.
To get have a peek at this site is recommended that you select a reputable CAN immobiliser installer who is skilled in your specific vehicle. Ideally, they'll have a workshop near you where you can visit to complete your installation. There is also a range of tools and materials that can assist you in the installation. They will come with basic hand tools, multimeters, insulation tape, and heat shrink tubing for protecting connections. A user's manual will give you the necessary instructions for the wiring in your vehicle.
Before beginning the installation remove the battery from the circuit to avoid short circuits and airbag deployment. It is important to double-check the exact location of the CAN H and CAN L wires as the wrong identification could result in unintentional system integration. It is recommended to mark the wires with small bits of tape or label them with labels. Make use of a multimeter to ensure that the power source is supplying the same 12V.
Advanced thieves can use different methods to bypass the Ghost Immobiliser. These include blocking and making false signals. These techniques work by amplifying the signal that is transmitted from your key fob to the electronic control unit of your vehicle. However, with advanced anti-jamming technology and vigilant monitoring you can safeguard your vehicle from these sophisticated attacks.
Enhanced security
Ghost immobilisers offer an extra layer of security to guard your car from theft. conversational tone has an PIN protection system that can be entered via buttons on the dashboard or steering wheel making it difficult for thieves to take your car. The device is designed to be hidden within your vehicle. It does not have lights or other indicators to alert burglars to its presence. It communicates directly with the ECU of your car via the data bus. This means that it is not vulnerable to relay attacks or hacking.
It's a fantastic investment for those who have high-end vehicles which are at greater chance of being stolen due to their value and the popularity of their vehicles. The enhanced features of the system protect your car from key duplicates and ECU swapping. Some ghost immobilisers can also be connected to an app, which means that you can easily arm and disarm them. They can also be equipped with a service/valet mode that allows you to temporarily disable them while your vehicle is being serviced or repaired.
A ghost immobiliser has another great feature that is that it doesn't need any cutting of wire. This is a great feature, especially if you have a newer car that doesn't have built-in immobiliser technology. Certain systems also work with GPS tracking devices, providing an extra layer of security to your vehicle. A GPS tracker may also reduce your insurance costs. If you decide to purchase a ghost immobiliser, make sure that it is TASSA verified and that a professional installer will install it for you.
Compatible with all major models and brands
The Ghost Immobiliser was made to work with all major car models and makes, safeguarding your pride and joy from theft. It makes use of buttons on your steering wheel, the centre console, or door panels to generate a unique pin code, that must be entered before you can drive your car. The system is tamper proof and undetectable, and is backed by a three-year warranty. It is also fully certified by insurance companies This means that it could help reduce your premiums.
Unlike standard immobilisers, which make use of your key fob to control the ignition of your car however, the Ghost system is connected directly to the engine controller unit through the CAN data bus. This means that it is tamper proof, virtually impossible to remove or disable and cannot be targeted by organized car theft gangs. In addition it is possible to use Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with an secure iPhone application that allows remote monitoring and management.
You can choose an PIN code that is easy to remember, but mathematically, it is impossible for thieves to figure out. The PIN can be personalized and modified at any time, so you can keep your car safe even when it's parked on the streets or in a parking lot. You can also choose a valet or service mode in case you need someone other than you to drive your car for a brief period, for example when you're in the garage for maintenance. This feature can also keep your car from being taken by a shady mechanic. You can select the Ghost Call alert to give you additional peace of mind. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser protects your vehicle from theft techniques like key relay or cloning. It is activated by connecting to the car's CAN network and blocking communication with the engine ECU. This makes it difficult for thieves to copy or hack your car, making the installation of this system a great idea for all drivers.
After installation, you'll have to enter a PIN code up to 20 digits long using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely hidden and inaccessible to thieves since it doesn't emit any radio frequency signals. It is also able to be set to an individual-changeable PIN code which adds security. The system is designed to avoid cutting the circuit, making it nearly impossible to hack.
If you have a problem remembering your PIN, there are systems that let you communicate with the immobiliser through an app on your phone, disarming it instantly. Some systems also have a service/valet setting that allows you to temporarily to start your car for example when you drop it off at a garage or valet park.
The Ghost Immobiliser also is undetectable by thieves, as it transmits no radio signals. This is a significant advantage over other security systems that are sold aftermarket. It is also easy to use and doesn't require any complicated wiring. You can also use it in conjunction with a dash cam to provide added safety. This dash cam is the Thinkware F70, which features clear and crisp 1080p HD dashcam footage and Format Free Technology and parking mode. The system is able to be hardwired to ensure maximum performance and durability.
Installation
If you're looking to secure your vehicle from theft, it's important to choose the correct immobiliser ghost. This device can stop car theft by blocking communication between the engine controller unit (ECU) and key fobs. This device prevents thieves from stealing the signal to start your vehicle. It also can detect when it has been tampered with and alert the owner of the vehicle.
The device is simple to install and integrates with the existing systems in your vehicle. It doesn't require any modifications to wiring of the vehicle and can be positioned in a hidden place, like under the dashboard. Follow the instructions in the manual to ensure that the device is installed correctly. After installation, it's important to test the system. This will ensure the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 immobiliser and then have it installed by a reputable installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to take it off or disable the system. The installation process typically takes between 2 and 3 hours.
During the installation process, it is recommended to review the wiring diagram of the model of your vehicle. This will allow you to locate the CAN High & Low wires. Low wires required to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure that they are safe and well-insulated.
After the installation is completed, you can start using the Ghost Immobiliser normally. It will disable the ignition of your vehicle if you don't start it with the correct PIN, which you will need to enter yourself. The immobiliser ghost cost can also be set to Service/Valet mode in the event that you need to hand over your vehicle for maintenance or valet parking.