Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's discrete, doesn't employ LED indications or key fobs and is concealed in the vehicle's wiring.
The user may also turn off the system for a short period of time by using Transport Mode when renting their car. This guide will guide you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system is directly connected to your vehicle's ECU and is secured by a unique PIN code that you choose. It is undetectable by thieves using diagnostic scanners and other modern methods. It cannot be disabled using circuit cuts.
The system is easy to use, but it is essential to have a professional installation to ensure a smooth and secure connection with your vehicle's ECU. Installers approved by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend a tracking system or alarm to complement the protection package for your vehicle.
First, the installer must disconnect your battery to prevent the possibility of airbag deployment and short circuits. When the battery is disconnected, the installer can start working safely. Hand tools are essential for making precise connections and a multimeter may be used to test electrical values and safety. Cable tie and insulation tape are crucial to ensure connections are secure and ensure that wiring is neat. The Ghost Immobiliser user's manual will provide specific instructions tailored to your model.
During the installation, it is crucial to select a grounding point that's free of debris and paint. Installers should also ensure that the immobiliser's wires, CAN H and can L are connected to the proper ECU ports. Depending on the model, these wires could require soldering or plugged into. A high-quality connector is recommended to ensure a sturdy and reliable connection.
Transport Mode can be turned on by the customer after the installation is complete. This allows valet parking or mechanics to use the vehicle without knowing the pin code. To do this, the user must hit the service button on the dashboard 5 times within 2 seconds. After this is done the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA verified and Thatcham approved. It's a great option for those who rent their vehicles often on platforms like Turo. Immobilisers can also lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
If you are seeking a solution to safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser. It prevents your car from starting even the case that someone steals or copies your key. It is possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device connects to the vehicle's bus network, CAN and allows direct communication with the ECU. It uses existing buttons on the dashboard and steering wheel to create a unique sequence only you know and makes it impossible for anyone else to start your car. This is the best way to safeguard your pride and joy. It will not lose its value should you ever decide to sell it.
Installing a ghost immobiliser can be an easy procedure, but it is crucial to follow the instructions carefully to avoid issues with electricity and system malfunctions. You must first locate a power supply of 12V and a good grounding on the car's chassis. Then, you can start connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques to ensure a solid connection. Insulate the connections using heat shrink tubing, insulation tape or other materials to prevent short circuits of electricity.
Once the wires have been connected, you are able to connect the battery and begin the engine to check whether the immobiliser works. If everything is functioning properly you can place it in a secure place under the dash or elsewhere in the vehicle. Be sure to hide it in a secure manner to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) which means it is a top-quality deterrent to car thieves. It is resistant to hacking and key cloning and cannot be disabled without the code. The device is simple to use, and it can be set into an option for a service valet so that your vehicle won't be activated when you take it for an MOT or service.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. The system doesn't transmit or receive radio frequency signals but instead uses CAN data to communication with your ECU. Additionally, it doesn't require any modifications to your vehicle's existing key fobs.
To make use of the Ghost Immobiliser simply switch on the ignition of your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. Once you've verified this, you're able to start your vehicle and leave in peace.
Once installed, Ghost Immobiliser safeguards your vehicle against hacking or key cloning, while also protecting its value. If you have to surrender your vehicle to valet parking or for service, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) as well as an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and can be touched. It's also recommended to use cable ties to tie and secure the wires. This reduces the risk of tampering by potential thieves. Make sure you double-check the position of these points to avoid committing a mistake, and mark them with the help of tape or a label. It's recommended to examine every connection for signs of wear and tear. Be sure to ensure that all connections are firmly in place and properly insulated. Don't forget to test your Ghost Immobiliser once the installation is completed. This will ensure that the unit is functioning correctly and that all connections are safe and well-insulated. Be sure to fix any issues as soon as they arise.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your car's ECU to prevent unauthorized motor starting. The innovative technology protects your vehicle from key cloning and hacking and other methods commonly used by thieves to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unparalleled features and secluded design make it a preferred option for car enthusiasts and security-conscious motorists alike.
It is essential to follow the procedures for installation to ensure proper integration of Ghost Immobiliser. Refer to the wiring diagram for the vehicle as it will assist you in locating and connecting the wires. You'll then need to identify the grounding and power sources. Once you've identified these, you'll have to mark them in a way that they're easy to identify during the installation process. It is essential to use top-quality materials and tools. Basic hand tools can assist to make precise connections and a multimeter can verify electrical values and ensure security. Cable ties and insulation tape will help keep all connections neat and tidy. A Ghost-specific user's manual is also available.
It is important to test the system prior to installing it. Enter the PIN code into the system and then start the vehicle. ghost immobiliser tracker will verify that the immobiliser works as intended and stop unauthorised vehicle starts. This procedure should be carried out regularly as part your regular inspections of your vehicle to ensure the system is always functioning properly.
Once the installation is complete After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will safeguard your vehicle from thieves who might steal your car. It will ensure that no one will escape with your car without having the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This allows you to track your car in the event that it's stolen.
The Ghost can be used on a variety of vehicles and is compatible with the majority of major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to learn more about our service and installation options. We are a TASSA registered installer, which ensures that we adhere to strict standards in the installation of our products. This reassures customers, insurers and law enforcement officials that all installations are completed safely and in a correct manner.