Ghost Immobiliser Fitter
Ghost immobilisers are one of the most effective ways to safeguard your vehicle from thieves. They stop vehicles from starting until the proper pin code is entered. They can also be used to track vehicles remotely. They are getting more and more popular and many insurance companies offer discounts to drivers with these systems.
It is tamper-proof
The Ghost Immobiliser is a high-tech security device that stops your vehicle from starting until a unique PIN code is entered or a beacon is detected. The system is completely discreet and can be customized to match your vehicle which makes it a highly efficient anti-theft solution. After installation, it's important to test the system to make sure that it's working properly. By entering the PIN as you start the engine is a straightforward way to test that the system is installed correctly. Regular testing will help to identify any issues or issues with the system in a timely manner.
The system communicates directly with the ECU and will not allow your vehicle to start unless you select the correct sequence. You can do this by using the electronic buttons located on your steering or through an app that you can download on your smartphone. Its low profile and tamper proof design make it difficult for thieves to steal. It can also be used with a beacon to track the location of your vehicle. It's an excellent way to protect vehicles that have been modified, or cars that are expensive or are rare.
This tamper proof device uses the buttons of your steering wheel to generate an exclusive sequence only known by you. The sequence is computationally unattainable for thieves to guess, and can be easily changed by using a secure reset code. It can be installed by a technician in the majority of automobiles.
After installing the device you'll need to connect it to a power source as well as a grounding point. To determine the wires needed to connect it, find the wiring diagram of your vehicle. Be sure to insulate the connections by using heat shrink tubing or insulation tape to avoid short circuits and electrical damage. You should also double-check the mounting and connections for signs of tampering by thieves.
Ghost 2 can be set in Service/Valet Mode to older vehicles which require battery isolation during servicing or maintenance. This will turn off the device with an unique pin code. This will stop it from being turned off again by thieves.
Wireless
In contrast to other anti-theft devices ghost immobilisers work silently and are not able to be identified by thieves. They can be installed in a variety of vehicles and shield them from hacking, key cloning, and signal relay attacks. They can also be used to track vehicles remotely. They can send owners instant notifications when their vehicle is stolen. Some insurance companies offer discounts for customers who install them. It is the most effective way to avoid car theft.
The Ghost II immobiliser is an inexpensive and easy solution to keep your vehicle safe from theft. This device is wireless and is compatible with all cars. It is weatherproof and tamper proof, making it an excellent option for any vehicle. It comes with a three-year guarantee. Unlike other security devices, Ghost II is not a security device that Ghost II does not require any additional wiring or other external components. Its unique pin code sequence safeguards your car from key theft and key cloning by preventing the engine from starting without a disarm code is entered. This sequence could range between one and 20 buttons, which means thieves will have to spend much more time trying to break the code before they can escape.
Another benefit of the Ghost II is its ability to stop signals from a thief's key fob. It will detect when a key fob has been hack or copied, and then disable the engine with an alarm. It also stops the use of signal relay devices, which are commonly used by organised car thieves to gain access to vehicles.
It is essential to test your Ghost Immobiliser system to ensure that it's working properly. This will help you spot any issues early and fix them before they become a major issue. It is an excellent idea to test the system by entering the PIN code and starting the engine as part of your routine check-ups of your vehicle.
It is essential that the immobiliser is mounted in a location that is hard to get at by thieves. If you can, hide the unit behind the dash using cable ties. Also, ensure that all connections are securely protected and are not vulnerable to theft by thieves. Verify that the mount is secure.
It is compatible with a range of vehicles.
The ghost immobiliser is an efficient security device that can help prevent car theft. ghost immobiliser cost prevents the engine of your car from starting until the appropriate pin code is entered. This code can be created by pressing the buttons on the steering wheel, door panel, or on the centre console. The immobiliser is safe from tampering and can be reprogrammed by the owner at anytime. It also shields against key-cloning and hacking.
It is recommended that you employ a professional to install the Ghost immobiliser. This is because the process of installation is complex and any errors could render the device ineffective or even harm your vehicle. Additionally, DIY installation may invalidate warranties for both the Ghost Immobiliser and your vehicle.
The best place to begin is to get the wiring diagram of your vehicle model. This will give you a guideline to locate the CAN H and L wires, which are the connections for the immobiliser. Mark these wires once you have located them, so that they do not become disconnected accidentally during installation. Also, ensure that you choose a safe and reliable grounding point for the system.
It is a good practice to test the immobiliser once the wires are connected to make sure that everything is working as it should. Then, enter the PIN code to begin your engine and verify that it starts correctly. It is recommended to test the immobiliser on a regular basis to ensure it functions in the way it was intended to.
The ghost immobiliser has the benefit that it doesn't need keyfobs or LED indicators. It is able to be deactivated using a unique sequence on your steering, door panel or the centre console. The immobiliser also leaves no trace of its installation, making it difficult for thieves to locate. Furthermore, it can be used to bolster the security of your vehicle in the event of a burglary and is recommended by a variety of insurance companies.
It is simple to install
The Ghost immobiliser, a sophisticated device, helps keep your vehicle secure even from the most experienced thieves. It prevents your car from starting unless a unique PIN code or sequence is entered on the key fob. This blocks hacking, cloning and even key theft, so thieves cannot drive away your car. It also makes use of a variety of other sensors that detect attempts to drive away, and alert the owner or the police in case of any tampering.
Installing a ghost-immobiliser can be tricky, especially for people without prior experience installing alarms or other security systems. Utilizing the appropriate tools and materials is crucial to a successful installation. A multimeter is helpful for confirming electrical values. Insulation cables and cable ties are also useful for protecting connections. The Ghost immobiliser user manual offers specific guidelines that are specific to the particular model and wiring of your car.
During the process of installation it is important to double-check the positions of the CAN H and L wires to ensure accuracy. They are vital for powering the immobiliser. Any errors could lead to an ineffective system or even failure. You should also mark the wires with a piece tape or labels to track them. You should also identify the source of constant 12V and a grounding.
Once you've found the right place, you can begin putting the ghost immobiliser together. To avoid short circuits or accidental airbag deployment, you will need to shut off the battery first. Then you can start connecting the wires. Be sure to adhere to the directions in the user manual to ensure a smooth and secure installation.
After you have completed the wiring after you've completed the wiring, connect your Ghost immobiliser via CAN to the engine control unit. This will make it difficult for thieves to remove or disable the device because it's directly connected the control unit. It's also tamper-proof and the only way to disable it is by entering a personal pin code. The pin code is only accessible to the owner of the vehicle and the installer.
You can also use the Ghost immobiliser to temporarily allow someone else to drive your car for a short period for instance, when you're out of town for work or require to get a service. This feature is called the Service/Valet Mode and it is activated by using a key fob or mobile app.