Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning and hacking by using the first aftermarket CAN-Immobiliser. With the option to connect to a Ghost app and GPS tracking system that will send you alerts to call in the event that your vehicle is damaged with or stolen.
The installation of an Ghost immobiliser is done by a trained technician. Having the right tools, insulation tape and heat shrink tubing are essential.
Getting Started
Contrary to physical theft protection devices such as wheel locks or car alarms, ghost immobilisers safeguard your vehicle without the need for key fobs or LED indicators. Instead, they connect directly to the ECU's CAN data network. They will only start after entering a PIN sequence. This gives a greater level of security against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a certain amount of agility and accuracy. It can be a bit like tiptoeing through the minefield. A single mistake could cause irreparable damage to the circuits of your vehicle's electrical system. It is important to understand the procedure for installing and prepare your vehicle properly.
First, you must prepare the vehicle by taking out interior panels to make room for the immobiliser device. Once you've located the perfect location to hide it put it in place by using cable ties to stop it from being removed or tampered with. Clean up ghost immobiliser cost by making sure that loose wires are tied down and using insulation tape to cover any exposed connections. This will help to reduce the chance of accidental short circuits while also improving the aesthetics and decreasing the chance of tampering from thieves.
Find the source of constant 12V power and a grounding location for the ghost immobiliser. Once you have located them, test the power cables with a multimeter. Connect the CAN H and CAN L wires of the immobiliser with the power source and grounding points.
It is crucial to double-check all the connections and inspect the immobiliser to look for signs of corrosion. It is also important to test the system to ensure it's working correctly by entering a PIN code and then starting the engine. This should be a regular part of your routine since it allows you to detect any issues that are intermittent early. Regular testing will help to prolong the life of your device and ensure it is running at its peak.
Preparing your vehicle
The installation of the Ghost immobiliser can be a difficult task that requires the right tools and knowledge. A wiring diagram of the vehicle is vital to locate the right wires and making accurate connections. A multimeter can be used to verify the electrical properties and ensure security. Cable ties and insulation tape can be used to guard connections from being tampered with and to ensure they are secured. Additionally, a user's manual will give you specific instructions tailored to the Ghost Immobiliser model you have.
Once installed, a ghost immobiliser can prevent unauthorised engine start by requiring that the owner input a unique PIN code sequence by pressing buttons on the steering wheel or centre console. This can be accomplished manually or remotely via the mobile phone app and the code can easily be modified by the vehicle's owner at anytime. The device is also quiet and undetectable by thieves, because it doesn't emit radio frequencies.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals transmitted by ECUs, and blocks the engine if a false signal is identified. The system is weatherproof and tamper proof. It does not have keys or LED indicators that could draw the attention of thieves.
It can be positioned behind or in a less visible location so that it's not visible to thieves, and does not interfere with vehicle's performance. It can be placed in a small jar, so it is less likely to be spotted by fraudulent salespeople when they test drive.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system is an effective deterrent to vehicle theft techniques like signal relay attacks and key copying. Combining the system with other security measures will create a powerful barrier to frustrate even the most persistent thieves. Many insurance companies recommend or even require ghost immobilisers as they can reduce the cost of insurance.
Making the Connections
Contrary to traditional security systems which are heard by thieves, ghost immobilisers are silent and keep them from being aware that your vehicle is turned on. They also block high-tech methods employed to steal vehicles, like OBD port hacking. They can also be fitted without causing permanent damage to your car making them a good option for those planning to sell their car in the near future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and current solutions to prevent car theft. It shuts down your engine by using the CAN data network and generates a unique PIN number, which is difficult for criminals to guess. It can be used on various automobiles, and it can work with all the features that are already in place including car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you choose to use a Ghost immobiliser for your vehicle, be sure to refer to the wiring schematic to identify the wires that connect. Make sure to double-check the location of these wires to ensure that they are in the correct location and mark them using tape or labels to aid in keeping on track of them. You'll also need to locate a constant power source (12V) for the system and the grounding. Once you have all the components, you can start connecting them to complete the installation.
If the ghost immobiliser is connected to your CAN bus it will prevent your vehicle from starting unless you enter a pin number using the buttons on the steering wheel or dashboard. This will stop ECU cloning and other methods of theft of vehicles. It can also be combined with other Thatcham approved security accessories such as alarms or tyre clips to provide your vehicle with an additional security level.
As the UK automotive aftermarket market continues to grow and expand, so do the options for securing your vehicle. With so many options for thieves to gain access and steal your car it's crucial to take every precaution to protect it from being taken away. That's why ghost immobilisers have become very popular among responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU, preventing the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves to copy your key fob and then start your car, and even more difficult to disable the system through hacking into its electronic components.
Ghost Immobilisers can also be used together with GPS tracking devices that will aid in tracking your vehicle's location and identify it in the event of theft. This isn't an everyday feature in security products sold by the aftermarket, but it's a great way to enhance your security and provide peace of mind knowing that your vehicle is always protected.
In addition to providing enhanced security in addition to providing enhanced security, in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience by removing the need for additional key fobs and devices. It comes with an easy and intuitive PIN code entry system that seamlessly into your daily routine. In addition, it offers modes of deactivation and other features that let you temporarily disable the immobiliser to allow valet parking or servicing.
Before you begin the installation process, familiarise yourself with your vehicle's wiring and prepare the required tools. A basic set of tools will allow you to make precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat shrink tubing are crucial for securing connections from short circuits, and cable ties can be used to secure the wiring in the correct position. It is also essential to work in a space that is well-lit and wear safety equipment when working with electrical equipment and components.
After you've completed the installation you must test the Ghost immobiliser to ensure that it's working properly. First, you should try to start the vehicle without entering the PIN code. If this fails, you will need to retest and inspect the connections more carefully.
The Ghost Immobiliser, unlike other security systems, is a secret device which cannot be recognized by thieves. It is also more effective than physical deterrents like wheel clamps and steering locks. It is TASSA recognized and approved by some insurance companies, which makes it an investment that's cost-effective and will provide you with peace of mind you need.